Specifications

Display	3½ Digit LCD.
Range	pH	0 - 14.00 pH
	ORP	0-1999mV
Temp	-100°C to 199.9°C.
Accuracy	0.5% ± 1 Digit.
Supply	110/220V AC ± 10%.
Input Impendence	>10¹² Ohms for pH/ORP.
Calibration	For pH 4 AND pH 7.
Display Select	By touch membrane switch indication with LEDs.
Temp Compensation	Manual : Range 0 - 100°C Automatic : Range 0 - 100°C
Outputs	pH	4-20 mA Isolated for 0 -14 pH
	ORP	1999 mV Non- Isolated
	EMP	0 - 1 V for 0-100°C Non Isolated.
Mounting	Wall Mounting on two Screws.
Size	160 mm x 170 mm
Depth	0 mm
Shipping Weight	900 grms

By making use of qualitative raw material, we manufacture conductivity, PH meters and transmitters. This electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. We can offer our conductivity meters according to the clients specifications.

Specifications of the control process indicator are given below:

• Single Channel/ Dual Channel/ Three Channel modes
• Microprocessor based ON/OFF controller.
• Input: Dedicated
• Display: 4 Digit, 0.5/ 0.3, 7 Seg. Red LED
• Accuracy: +/- 0.25% F. S
• Power Supply: 230 V AC +/- 10%, 50 Hz
• Range: Programmable through front keypad Optional:
• Alarm Output: Potential free relay Contact
• Transmitter Supply: 24 V DC, 30 mA
• Retransmission Output: 4-20 mA DC / 1- 5 V DC, Isolated
• Communication Port: RS 485/ RS 232 supporting MODBUS RTU protocol PH Transmitter: Our PH transmitter is widely demanded for various industrial purposes. The technical specifications of the on-line treatment are given below:
• Power Supply 24 V DC, External
• Output 4 - 20 mA DC, 2 wire Isolated
• Auto/ Manual temperature compensation up to 100 C Display 8 x 1 LCD
• Enclosure Flame - proof, IP-65, IIa, IIB, CMRI certified software calibration with buffer solution
• Mounting 2" Pipe
• Compatible with all types of pH electrodes suitable for various service conditions.
• Flow through on demand.

Specifications

Display	3 1/2 Digit 0.5 inch height Red LED.
Range	0-14.00 pH
Input Impendence	>10¹² OHMS
Resolution	0.01 pH
Accuracy	+/- 0.5%
Calibration	Front Adjustable pH 4 & pH 7
Temp. Compensation	Automatic using PT-100 Temp Sensor
Supply	220V +/- 15% AC 50Hz
Size	96x96mm Front Facia

We make KI-110 is a field mounted type ( On-line) digital conductivity Indicator. It comes in IP-65 plastic enclosure. The IP - 65 plastic enclosure enqures protection from corrosive, wet, dusty atmosphere. The advanced solid state electronic module gives accurate and repetitive reading. It is very easy to install and to calibrate.

Conductivity Range:

• 0 to 4
• 0 to 40
• 0 to 100
• 0 to 2000 ( Scale is in uS/cm/ppm)

For control applications such as initiation of regeneration of automatic demineralizers, pump tripping or audiovisual alarm, the Panel mounted conductivity controller KT - 250 is the best instrument available in the market today. At the set point, relay gets energized.

Our company specializes in design and development of a wide range of conductivity meter such as On Line pH Indicator.  The conductivity meters of our company are appreciated for the properties like easy to install, accurate reading and light weight. This device is used to measure the electrical conductivity. A pH meter is broadly of two types i.e., manual and automatic. An automatic conductivity indicator operates on AC voltage and measure pH level in the solutions using digital sensor. Our pH display meters are extensively used in Biological Research Laboratories, Chemical, Water Treatment, Rubber plants and other industries.

Specific properties:

• Light weight
• Advanced display meter
• Accurate measurement
• Easy to use

Specifications:

Display	3 1/2 Digit 0.5 inch height Red LED
Range	0-14.00 pH
Input Impendence	>10¹² OHMS
Resolution	0.01 pH
Accuracy	+/- 0.5%
Calibration	Front Adjustable pH 4 & pH 7
Temp. Compensation	Automatic using PT-100 Temp Sensor
Supply	220V +/- 15% AC 50Hz
Size	96x96mm Front Facia

We offer pH/ TDS/ conductivity meter/ transmitter that measures the electrical conductivity. Easy to install and operate, these provide accurate and reliable reading and have long functional life. The range is available in various configurations and can withstand voltage fluctuation. Customization is also provided as specified by the client.